Iron
Ore
A large Western Australian Iron Ore mine processes iron ore to
produce both a lump and fines product which is then delivered to
the Dampier loading facility. A MoistScan® MA-500HDi was trialled
on the product conveyor belt which produces their fines product.
The MoistScan® MA-500HDi was designed to provide product
moisture measurement in deep bed depth & high attenuating
material such as iron Ore.
An exhaustive trial program involving comparative analysis of in
excess of 300 physical samples with the MA-500HDi trial unit,
resulted in a decision to retain two(2) MA-500HDi units for the
online moisture measurement component of the plant
reconciliation plan.
The analyser was proven to have an accuracy of approximately
0.6% total moisture with a product bed depth of 350mm over a
moisture range of 8.0% to 14%.
Application examples
Instrument:
Material:
Installation:
Bed Depth:
Moisture:
Purpose: |
MA-500HDi
Iron Ore Filter Product
Conveyor C after disc filters and prior to pelletiser
Up to 150mm
8 - 11%
Monitor performance of filter discs
|
 |
Instrument:
Material:
Installation:
Bed Depth:
Moisture:
Purpose: |
MA-500HDi
Iron Ore Pellets
On-conveyor to ship load out
Up to 450mm
1 - 3%
Dust management
|
 |
Instrument:
Material:
Installation:
Bed Depth:
Moisture:
Purpose: |
MA-500HDi (2 units)
Sinter Blend
On conveyor feed to blast furnace
150mm
1 to 6%
Control moisture of sinter fed to blast furnace
|
 |
Instrument:
Material:
Installation:
Bed Depth:
Moisture:
Purpose: |
MA-500HD
Iron Ore
On conveyor after train load out bins. Ore lump and
fines, 9 ore types from 5 locations, use preset
calibrations for each ore type
Monitor product for compliance to specification & for
dust control
|
 |
Contact us for more
information
